|
|
Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
|
T O P I C R E V I E W |
AzzaD |
Posted - 25 Nov 2011 : 09:59:42 AM I've got a VN SS that had the front bar replaced, but it doesn't have the cut outs to accommodate the fog lights. I was wondering if anyone had any info on the measurements of the cut outs? |
2 L A T E S T R E P L I E S (Newest First) |
AzzaD |
Posted - 25 Nov 2011 : 4:28:15 PM Thanks. I was going to do that, but thought I'd check if anyone could put a bit of clarity on the issue. |
VNGRPA |
Posted - 25 Nov 2011 : 3:02:42 PM sounds like you just got a vn bumper there mate the only difference between the vn v6 and vn v8 front bumper is the v8 lip and fog light holes, all you have to do is put the fog light up to the bumper and draw around the fog light at the bottom but cut on the inside of the line the lights themselves are 177mm x 80mm i believe, i looked in to it a while back as i wanted to put them on my car but didn't want to pas $$$ for a SS front bumper as there the same as the v6 ones they just have the v8 lip added to it |
|
|
www.VNCommodore.com Support Forums |
© 2005 - 2025 |
|
|
Do not Click Here
|