|
|
Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
|
T O P I C R E V I E W |
Micfromtrundle |
Posted - 01 Feb 2013 : 12:24:31 AM Hi Guys, I put in a new rope seal and new main and conrod bearings in a vn/toyota lexcen and the crank will not turn over until I back the No 4 Main bearing off and it turns like a newbie. What has happened, did I put the rope in far enough , are the mains bearing the wrong size Any help would be happy. Mick |
1 L A T E S T R E P L I E S (Newest First) |
VNSVLE |
Posted - 01 Feb 2013 : 3:56:44 PM If you still have the engine out of the car a quick test would be remove the rope seal and tension the main bearings again and see what happens. I take it it is a series 1?? |
|
|
www.VNCommodore.com Support Forums |
© 2005 - 2024 |
|
|
Do not Click Here
|