|
|
Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
|
T O P I C R E V I E W |
Jack Kennedy |
Posted - 12 Nov 2014 : 1:34:21 PM Hi,, Maybe someone can help me.. I have a fuel leak out of the injector rail on 1 injector.. so anyway , I had to buy the whole injector kits to get the O-rings for the rail.. So can someone, who maybe has prior experience with this,, tell me,, If I am going to the effort to remove the fuel rails,,, would it be wise to do each of the injectors at the same time? There is no problem with the injectors at present time,,, but seeing as though I already have all the parts needed, I am wondering if I should do it as a maintenance issue... How difficult is it to put new seals etc. in the injectors ? Or should I just leave the injectors alone,, and only change the rails seals,, and put the rest of the parts in the draw ? any ideas from anyone ? regards .... Jack |
1 L A T E S T R E P L I E S (Newest First) |
Cartrite |
Posted - 20 Nov 2014 : 10:22:31 AM IIRC the o-ring on the injector is easy to replace,when i did mine i just fitted new injectors,around $180 for 6 Siemens off Ebay. |
|
|
www.VNCommodore.com Support Forums |
© 2005 - 2024 |
|
|
Do not Click Here
|