| T O P I C R E V I E W |
| jason88eh |
Posted - 13 Aug 2011 : 9:09:51 PM I want to paint the entire intake on the Buick v6 in my EH the same color as my car and would like to remove it to do a good job. What gaskets will I need to do this and is there anything special I should know about. Cheers |
| 3 L A T E S T R E P L I E S (Newest First) |
| VNGRPA |
Posted - 14 Aug 2011 : 6:29:27 PM yer mate just be careful not to break the o-rings |
| jason88eh |
Posted - 14 Aug 2011 : 4:14:22 PM Ok cheers mate I'l try that next weekend. So its ok to just pull injectors etc off to take it out. |
| VNGRPA |
Posted - 14 Aug 2011 : 1:15:51 PM just the intake manifold gaskets mate there's 4 peaces, 2 little blue ones that go at the front and back and 2 side ones only thing you might have to check is the torque settings on the little bolts that hold it on, you might need a tb gasket and the elbow one but most of the time if you take it apart slowly they should be fine, shouldn't cost more the $20 mate from repco |