Author |
Topic |
|
|
Current Topic Rating: | Join the Forum to Rate this Topic at: www.VNCommodore.com Support Forums
|
|
andrewpapa
Fully Licenced
122 Posts
|
Posted - 01 May 2010 : 03:47:51 AM
|
hi to every one on this site my name is andrew papa i live in sydney ,i have had my vn v6 for 9 years i was a ford cotina te man all my driving life i needed a good car to go to work in so i Burt a 1989 vn v6 5 speed manule mods are all from this site thank you , i have done to my vn are cai ,tb open 100% ,tachometer , installed lpg gas 3 years ago ,exhaust no rear muffler just a straight thru pip-catalytic converter is a big hot-dog now no internals in catalytic converter this mod and a reset the cpu made a big improvement in power all mods are from this site so thank you for all the info plus info on how to fix vn v6 i have a vn gregory's service and repair manual but it dos not have all the info to fix car this site has helped me allot thank you all for this site and posting info on site top info top mods thanks
|
i am not a licenced mechanic but i do have years off experience fixing and restoring cars and doing them up ,i can even do-motors-up,panel betting,spray painting,electrical work. i know What i am doing when fixing my cars, i am not saying i know everything on how to fix cars but i can fix them with information and help off the internet and this site.vncommador.com |
Report to Moderator |
|
VNSVLE
Forum Moderator
1316 Posts
|
Posted - 01 May 2010 : 03:52:17 AM
|
Welcome to the family buddy!! Good to hear you have tried some of the mods. You will have to put some pics up buddy :) Cheers |
What's the difference between understeer and oversteer? Understeer is when the driver is scared. Oversteer is when the passenger is scared. |
Report to Moderator |
|
andrewpapa
Fully Licenced
122 Posts
|
Posted - 01 May 2010 : 04:14:42 AM
|
hi thank you i have gust painted the car tow weeks ago in acrylic paint Mensa read gust sill have to sand car back with 1200 hundred wet and dry sand paper and then buff the holl car to get it glossy i am waiting for paint to dry good before i start it ,it is a lot of work to paint a car . i have bad back and hands from work havey lifting so i work on car when i am felling ok thanks for help whith my faulty coolant circulation-lpg convertor frezzing up problem |
i am not a licenced mechanic but i do have years off experience fixing and restoring cars and doing them up ,i can even do-motors-up,panel betting,spray painting,electrical work. i know What i am doing when fixing my cars, i am not saying i know everything on how to fix cars but i can fix them with information and help off the internet and this site.vncommador.com |
Report to Moderator |
|
Mechknight73
National Driver
1001 Posts
|
Posted - 01 May 2010 : 2:03:01 PM
|
Another bit of "semi-useful" trivia you might not know about Commodores; if you decide HSV wheels, or any of the usual options aren't you cup of tea, just about anything that fits a Jag, BMW, Corvette, or any of its US GM cousins will fit. The only thing you have to watch out for is the offset, and whether or not they fit under the guards |
Report to Moderator |
|
andrewpapa
Fully Licenced
122 Posts
|
Posted - 01 May 2010 : 5:00:39 PM
|
hi how do i add photos to this post? i have taken photos today but i do not now how to post hire |
i am not a licenced mechanic but i do have years off experience fixing and restoring cars and doing them up ,i can even do-motors-up,panel betting,spray painting,electrical work. i know What i am doing when fixing my cars, i am not saying i know everything on how to fix cars but i can fix them with information and help off the internet and this site.vncommador.com |
Report to Moderator |
|
andrewpapa
Fully Licenced
122 Posts
|
Posted - 03 May 2010 : 8:16:01 PM
|
hi i have photos off vn v6 lpg engine bay ,i have just painted my car in acrylic monza red ,i still have to rub back car with wet and dry sandpaper and then buff car to get it glossy ,sorry i have not cleaned car since i painted it and i have 15inch mags but not on car. ps: sorry my spelling i forgot to check it.sorry and thank you photos http://www.facebook.com/profile.php?id=100000514457334&v=photos&ref=profile#!/album.php?aid=17852&id=100000514457334 |
i am not a licenced mechanic but i do have years off experience fixing and restoring cars and doing them up ,i can even do-motors-up,panel betting,spray painting,electrical work. i know What i am doing when fixing my cars, i am not saying i know everything on how to fix cars but i can fix them with information and help off the internet and this site.vncommador.com |
Report to Moderator |
|
andrewpapa
Fully Licenced
122 Posts
|
Posted - 25 May 2010 : 12:45:17 AM
|
hi paint job monza-red just painted car - i have sanded car with 1200 wet and dry i have just got to sand inside the door handles i forgotten to do them. i went to super-cheep auto and Burt cutting compound and an knew puffing pad for my buffer so i will be buffing car soon and i will take photos and post on site . how do i add photos to this post ? |
i am not a licenced mechanic but i do have years off experience fixing and restoring cars and doing them up ,i can even do-motors-up,panel betting,spray painting,electrical work. i know What i am doing when fixing my cars, i am not saying i know everything on how to fix cars but i can fix them with information and help off the internet and this site.vncommador.com |
Report to Moderator |
|
andrewpapa
Fully Licenced
122 Posts
|
Posted - 25 May 2010 : 01:07:51 AM
|
how do i add photos directly to this post or site ? |
i am not a licenced mechanic but i do have years off experience fixing and restoring cars and doing them up ,i can even do-motors-up,panel betting,spray painting,electrical work. i know What i am doing when fixing my cars, i am not saying i know everything on how to fix cars but i can fix them with information and help off the internet and this site.vncommador.com |
Report to Moderator |
|
trizo
Forum Moderator
3091 Posts
|
Posted - 30 May 2010 : 3:50:51 PM
|
welcome m8,hope to c more of you! |
3 can keep a secret if 2 are dead |
Report to Moderator |
|
|
Topic |
|