Not registered? Then you're not seeing all there is to see. Do you want to contribute? Register now by clicking HERE!
www.VNCommodore.com Support Site - Forums Page © 2005 - 2024
    Forums Page 

 
Main Menu

Start Page  
Forums  
Register  
Recipe Book  
Active Topics  
Active Polls  
Forum Search  
Online Auctions  
Online Classifieds  
FAQ  
Greeting Cards  
Guestbook  
Disclaimer  
Contact Us  
Links  
Username:

Password:

Save Password
Forgot your Password?

 
 All Forums
 General Area
 VN Talk
 v8 no go
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  
  Current Topic Rating: Total Rating: 0 | Join the Forum to Rate this Topic at: www.VNCommodore.com Support Forums  

clint87
Starting in the driveway



3 Posts

Posted - 11 Apr 2011 :  6:05:25 PM  Show Profile Send clint87 a Private Message
 
vn v8 wont start has new dizzy fuel pump and engine light does not come on when key is turned on
Report to Moderator

VNSVLE
Forum Moderator


smiley-blunder

1316 Posts

Male

Posted - 11 Apr 2011 :  9:50:02 PM  Show Profile Send VNSVLE a Private Message
 
Has it got spark??
Has it got fuel??
Have you checked all fuses??
 

What's the difference between understeer and oversteer?
Understeer is when the driver is scared.
Oversteer is when the passenger is scared.
Report to Moderator Go to Top of Page

VNGRPA
Fully Licenced


monsters-skull

426 Posts

Male

Posted - 12 Apr 2011 :  12:40:32 PM  Show Profile Send VNGRPA a Private Message
 
quote:
Originally posted by VNSVLE

Has it got spark??
Has it got fuel??
Have you checked all fuses??

after you have done what VNSVLE said if its still not going i noticed you have changed the dizzy i had the same problem with a vq when i put the dizzy in it wasnt at the right spot and the timing was off and wouldnt start once i turned the dizzy a bit it started
Report to Moderator Go to Top of Page

VNSVLE
Forum Moderator


smiley-blunder

1316 Posts

Male

Posted - 12 Apr 2011 :  4:48:28 PM  Show Profile Send VNSVLE a Private Message
 
good point VNGRPA was the dizzy timed properly before put in and was it timed after??
 

What's the difference between understeer and oversteer?
Understeer is when the driver is scared.
Oversteer is when the passenger is scared.
Report to Moderator Go to Top of Page

clint87
Starting in the driveway



3 Posts

Posted - 14 Apr 2011 :  7:45:54 PM  Show Profile Send clint87 a Private Message
 
all fuses good
has no power at fuel pump when key is on
was running good before hand and the engine light does not come on when key is turned on any more
Report to Moderator Go to Top of Page

VNSVLE
Forum Moderator


smiley-blunder

1316 Posts

Male

Posted - 14 Apr 2011 :  8:27:46 PM  Show Profile Send VNSVLE a Private Message
 
No power at pump will either be fuse, relay, plug or a wiring fault
 

What's the difference between understeer and oversteer?
Understeer is when the driver is scared.
Oversteer is when the passenger is scared.
Report to Moderator Go to Top of Page

VNGRPA
Fully Licenced


monsters-skull

426 Posts

Male

Posted - 17 Apr 2011 :  4:14:05 PM  Show Profile Send VNGRPA a Private Message
 
did you get it all sorted
Report to Moderator Go to Top of Page

clint87
Starting in the driveway



3 Posts

Posted - 17 Apr 2011 :  7:32:40 PM  Show Profile Send clint87 a Private Message
 
it starts now the problem comes and go's all the fuses are good and when it does not start the engine light wont come on there for no spark no power for fuel pump no go
Report to Moderator Go to Top of Page

Mechknight73
National Driver


robot-robot14

1001 Posts

Male

Posted - 19 Apr 2011 :  1:27:46 PM  Show Profile Send Mechknight73 a Private Message
 
With this kind of bug, you might have to trace the wires one by one. Intermittent ëlectrical/electronic faults like this tend to be caused by:
-Bad connections
-Corrosion in the wiring
-Fraying in the wiring. For example, if a wire is meant to have 50 strands, and only 20 of them are connected, this will create resistance. Resistance wreaks havoc particularly on electronics, so look around for the obvious stuff. Clean fuse and other connectors, check for any loose ocnnectors, and make sure any earth leads have a good solid connection
Report to Moderator Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
www.VNCommodore.com Support Forums © 2005 - 2024 Go To Top Of Page  
This page shown in 1.14 seconds.   Snitz Forums 2000
Do not Click Here
   
 


Currently 2173 user(s) online
 
Copyright © 2005 - 2024 by: Greening Computer Services