| Author |
 Topic  |
|
| |
Current Topic Rating:  | Join the Forum to Rate this Topic at: www.VNCommodore.com Support Forums
|
|
|
yanna
P Plater
43 Posts
 |
 Posted - 22 Oct 2006 : 6:36:46 PM
|
|
hey, is it possible to fit all of the calais electric options into my executive, if so how hard would it be to do
|
Edited by - mouce on 23 Oct 2006 10:22:48 AM |
|
Report to Moderator |
|
|
mouce
National Driver
1525 Posts
|
Posted - 23 Oct 2006 : 10:28:39 AM
|
In short, yes it's possible, but it takes a bit of fiddling around to get it right.
From memory there are electric windows, electric mirrors, the L3 dash cluster and the climate control.
The electric windows are probably the easiest of the lot, followed by the electric mirrors.
The L3 cluster requires you to add an extra connector to the wiring loom in the dash (which isn't too bad if you know which end of the soldering iron to hold). To go with the conversion to the L3 cluster you will also need to change the switches on the cluster surround so that you can actually use the LCD readouts properly.
From what I've been told, the climate control is a real prick of a job. For no other reason than that there isn't much room in there.
I know a lot of people have moved the electric windows into their execs, and the L3 cluster is a popular mod too. I don't know too many people who have actually gone to the trouble of doing the climate control upgrade though. |
Bite off more than you can chew, and chew like hell - Peter Brock (1945-2006) |
Report to Moderator  |
|
|
FXST01
P Plater
37 Posts
|
Posted - 23 Oct 2006 : 4:52:06 PM
|
| don't forget the cruise control, which is moderately easy. |
Illegitimi Non Carborundum |
| Report to Moderator |
|
|
trizo
Forum Moderator
3091 Posts
|
Posted - 25 Oct 2006 : 7:20:53 PM
|
mine has a cruie control cluster but not connected how easy is it and wat other componets r involved?
|
3 can keep a secret if 2 are dead |
| Report to Moderator |
|
| |
Topic |
|
Topic Locked
