Not registered? Then you're not seeing all there is to see. Do you want to contribute? Register now by clicking HERE!
www.VNCommodore.com Support Site - Forums Page © 2005 - 2024
    Forums Page 

 
Main Menu

Start Page  
Forums  
Register  
Recipe Book  
Active Topics  
Active Polls  
Forum Search  
Online Auctions  
Online Classifieds  
FAQ  
Greeting Cards  
Guestbook  
Disclaimer  
Contact Us  
Links  
Username:

Password:

Save Password
Forgot your Password?

 
 All Forums
 General Area
 VN Talk
 starting 6cyl with possible multiple problems
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  
  Current Topic Rating: Total Rating: 0 | Join the Forum to Rate this Topic at: www.VNCommodore.com Support Forums  

davejhjh
Starting in the driveway



1 Posts

Male

Posted - 25 May 2018 :  03:51:16 AM  Show Profile Send davejhjh a Private Message  Reply with Quote
 
my ute has had new starter installed it wont fire. it has spark and fuel pressure up to injector rail. have primed injectors (yes not supposed to) then will run for feww seconds but horrible gear grinding noise SOMETIMES. like its ring gear but slightly higher up sound. we thought starter wasnt letting go after initial throw out so friend isolated wire solenoid and switched solenoid manually. this (starter) was not problem. am i left with possible crank angle sensor fault and/or blocked or stuffed injector(s) and/or both plus ring gear failure about to happen also . im stumped. have changed out neutral safety switch on trans selector also. please any ideas or wisdom much appreciated
Report to Moderator
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
www.VNCommodore.com Support Forums © 2005 - 2024 Go To Top Of Page  
This page shown in 0.69 seconds.   Snitz Forums 2000
Do not Click Here
   
 


Currently 2602 user(s) online
 
Copyright © 2005 - 2024 by: Greening Computer Services