Not registered? Then you're not seeing all there is to see. Do you want to contribute? Register now by clicking HERE!
www.VNCommodore.com Support Site - Forums Page © 2005 - 2025
      Forums Page 

 
Main Menu

Start Page  
Forums  
Register  
Recipe Book  
Active Topics  
Active Polls  
Forum Search  
Online Auctions  
Online Classifieds  
FAQ  
Greeting Cards  
Guestbook  
Disclaimer  
Contact Us  
Links  
Username:

Password:

Save Password
Forgot your Password?

 
 All Forums
 General Area
 Technical Modifications
 304 problem

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: Bold Italicized Underline Strikethrough Align Left Centered Align Right Horizontal Rule Insert Hyperlink Insert Email Insert Image Insert Code Insert Quote Insert List Insert YouTube
   
Message:

Smilies
Angry [:(!] Approve [^] Big Smile [:D] Black Eye [B)]
Blush [:I] Clown [:o)] Cool [8D] Dead [xx(]
Disapprove [V] Eight Ball [8] Evil [}:)] Kisses [:X]
Question [?] Sad [:(] Shock [:O] Shy [8)]
Sleepy [|)] Smile [:)] Tongue [:P] Wink [;)]

   -  HTML is OFF | Forum Code is ON
 
Check here to subscribe to this topic.
   

T O P I C    R E V I E W
ibo Posted - 04 Oct 2011 : 3:57:18 PM
Hey guys
I got a problem with my vn 304, its starts up fine when it’s cold, but once the car gets pretty warm, the car just cuts off randomly and when you try to start it back up, the revs just go crazy and it cranks and cranks and she wants to fire up but doesn’t. Sometimes it back fires. Any ideas what this can be? I do have one injector leak which I haven’t not changed yet also I have changed the internal fuel pump with a 400hp one which by-passes the external pump (has been disconnected). Once the motor has cooled down it starts up fine.

iv tried doing a code check but didnt work for some reason. also iv been told cud be ecu or either the hall effect sensor in the distrubutor.

help would be much appreciated thanx
3   L A T E S T    R E P L I E S    (Newest First)
kingbucktoo Posted - 02 Nov 2011 : 8:51:05 PM
Have you solved your problem?? How??

I think I have the same problem for the second time. My Car is misfiring at all revs and stalling when idling. Its just that the EST controllers are quite expensive for reconditioned (exchange)
kingbucktoo Posted - 31 Oct 2011 : 6:09:31 PM
I had something similer, it was the EST controller on the left hand inside guard. My car's symptons were similar except the revs where ok at idle, The easiest way to prove the fault is swap the controller between cars. I'll look for the document to test your hall effect device and scan it in if required.
Mechknight73 Posted - 05 Oct 2011 : 8:54:06 PM
It could be either of those, but first check the fuses and relays connected to the ECU. If the ECU fuse has corrosion, it may create some resistance, enough to confuse the ECU into shutting down the engine

www.VNCommodore.com Support Forums © 2005 - 2025 Go To Top Of Page  
This page shown in 0.58 seconds.   Snitz Forums 2000
Do not Click Here
   
 


Currently 1117 user(s) online
 
Copyright © 2005 - 2025 by: Greening Computer Services