| Author |
 Topic  |
|
| |
Current Topic Rating:  | Join the Forum to Rate this Topic at: www.VNCommodore.com Support Forums
|
|
|
pittin
P Plater
10 Posts
 |
 Posted - 23 Aug 2007 : 9:46:59 PM
|
Hey guys, ive just recently got a pair of 6in pioneer speakers for the good ole vn and im not sure where i run the cables? im planning on putting them in the front doors. I heard its a pretty simple job? isnt it?
Anyway, any help would be greatly appreaciated
Tyler
|
|
Report to Moderator |
|
|
trizo
Forum Moderator
3091 Posts
|
Posted - 23 Aug 2007 : 9:50:32 PM
|
dont know squat about speakers but will say welcome aboard m8!  |
3 can keep a secret if 2 are dead |
Report to Moderator  |
|
|
pittin
P Plater
10 Posts
|
Posted - 23 Aug 2007 : 9:55:52 PM
|
| Lol thanks a heap trizo :D i appreciate the welcoming. |
| Report to Moderator |
|
|
TassieCommodore
P Plater
49 Posts
 |
Posted - 24 Aug 2007 : 07:44:07 AM
|
sorry i cant help ya either (female here lol)
but im sure one of the members will b able to help
goodluck |
I Wanna PIMP MY RIDE!! |
| Report to Moderator |
|
|
vnkid
P Plater
56 Posts
|
Posted - 24 Aug 2007 : 08:39:00 AM
|
| i would think with running speakers for the front doors, i would think wires down from the h/u, out the back running under or along the top of the footwells, then through a hole in the doors from the chassis. will help to have the door trim off too i would think also. |
| Report to Moderator |
|
|
j2dabee
P Plater
19 Posts
|
|
|
aussiefastbowler
Fully Licenced
404 Posts
|
Posted - 24 Aug 2007 : 3:51:12 PM
|
are you running them from an amp or your deck?
I would run them behind all your panneling and glove box, and through the hinge area of the door, thats where mine is running.
for an amp, depends where you have the amp. |
To alcohol! The cause of and solution to all of life's problems! |
| Report to Moderator |
|
|
pittin
P Plater
10 Posts
|
Posted - 24 Aug 2007 : 5:48:22 PM
|
| okay thanks guys, i got a fair idea of what i gotta do. just gotta wot for the weather now :( |
| Report to Moderator |
|
|
f8tal02118
P Plater
72 Posts
|
Posted - 22 Sep 2007 : 7:54:24 PM
|
aussiefastbowler is right about
running them behind all your panneling and glove box, and through the hinge area of the door. in the hing area there is a rubber gromit. you should run in through this to prevent pinching of the cable. you should see it when you take ur left kick pannel off. if you cant get it through there u can cut the 2 wires to the curtesce lights and use them.
|
| Report to Moderator |
|
| |
Topic |
|
Topic Locked
