Not registered? Then you're not seeing all there is to see. Do you want to contribute? Register now by clicking HERE!
www.VNCommodore.com Support Site - Forums Page © 2005 - 2024
    Forums Page 

 
Main Menu

Start Page  
Forums  
Register  
Recipe Book  
Active Topics  
Active Polls  
Forum Search  
Online Auctions  
Online Classifieds  
FAQ  
Greeting Cards  
Guestbook  
Disclaimer  
Contact Us  
Links  
Username:

Password:

Save Password
Forgot your Password?

 
 All Forums
 General Area
 VN Talk
 Stuck ignition
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  
  Current Topic Rating: Total Rating: 0 | Join the Forum to Rate this Topic at: www.VNCommodore.com Support Forums  

knightrook
P Plater


medieval-dark-knight

67 Posts

Male

 
Posted - 07 Feb 2009 :  8:29:35 PM  Show Profile Send knightrook a Private Message
 
hey guys, long time no post!! so, i went to start the vn today and the ignition wouldnt turn. absolutely wouldnt budge. usually the little gaurd thing pops out after you put the key in, but the time it was all just frozen up, im thinking that maybe i should just use some graphite powder or other form of lubrication to free it up but im not too confident about pouring something into my ignition... the only thing that i can think that maybe has happened is that maybe the heat has expanded the mechanism inside the lock and now its frozen up until it cools down (46.4 degrees in melbourne today, hottest day on record!) anyway, any help would be appreciated. cheers!!
 

Theres a fine line between not knowing and not caring... i like to think i walk that line everyday of my life
Report to Moderator

trizo
Forum Moderator


desert-sheriffstar

3091 Posts

Male

Posted - 08 Feb 2009 :  1:01:09 PM  Show Profile  Visit trizo's Homepage  Click to see trizo's MSN Messenger address Send trizo a Private Message
 
just a bit of crc or even a bit of graph powder will work, can you get the ignition off the steering coloum? If so will be alot easier to work with!
 

3 can keep a secret if 2 are dead
Report to Moderator Go to Top of Page

VNSVLE
Forum Moderator


smiley-blunder

1316 Posts

Male

Posted - 08 Feb 2009 :  1:12:47 PM  Show Profile Send VNSVLE a Private Message
 
had the same thing happen to someone out at work in a vr/vs. all we did was put a bit of graphite powder straight in the hole and worked the key while wriggling the steering wheel a bit and it freed up alright. as trizo said if you can pull the barrel off it will be better and easier to free up. if you do get it off give it a good clean out with some CO contact cleaner if you can get some ( CO is the flammable version which is better for plastics) and then give it a good dose of graphite powder and all should be good. I would not recommend crc as dirt will more than likely build up over time and will give you more trouble.
 

What's the difference between understeer and oversteer?
Understeer is when the driver is scared.
Oversteer is when the passenger is scared.
Report to Moderator Go to Top of Page

nodg
National Driver



1667 Posts

Male

Posted - 09 Feb 2009 :  11:57:26 AM  Show Profile  Click to see nodg's MSN Messenger address Send nodg a Private Message
 
either a problem with the ignition barrel which may or may not be fixed with graphite powder or you might have a bent key...
 

Cheers,
Nodg.
Report to Moderator Go to Top of Page

hsv_babe
Fully Licenced


cart046

269 Posts

Female

Posted - 12 Feb 2009 :  6:45:04 PM  Show Profile  Visit hsv_babe's Homepage  Click to see hsv_babe's MSN Messenger address Send hsv_babe a Private Message
 
this sounds like a common problem with commodore ignitions! I had the same thing happen to my partners vx. I was stuck in the middle of town with my son it just wouldn't budge! The steering wheel locked and everything! I thought it was the key so i got my mother in law to bring me the spare key and just as she got there say half an hour later the ignition unlocked and i was able to start the car. It did it again a few more times then stopped doing it completely and haven't had a problem since so maybe sit there for a while trying to get it to unlock?
 

I'd gladly push my holden than drive a bloody ford!
Report to Moderator Go to Top of Page

VNSVLE
Forum Moderator


smiley-blunder

1316 Posts

Male

Posted - 15 Feb 2009 :  2:11:39 PM  Show Profile Send VNSVLE a Private Message
 
How did you go buddy?? Any luck??
 

What's the difference between understeer and oversteer?
Understeer is when the driver is scared.
Oversteer is when the passenger is scared.
Report to Moderator Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
www.VNCommodore.com Support Forums © 2005 - 2024 Go To Top Of Page  
This page shown in 1.28 seconds.   Snitz Forums 2000
Do not Click Here
   
 


Currently 2311 user(s) online
 
Copyright © 2005 - 2024 by: Greening Computer Services