| Author |
 Topic  |
|
| |
Current Topic Rating:  | Join the Forum to Rate this Topic at: www.VNCommodore.com Support Forums
|
|
|
vn-s
Starting in the driveway
3 Posts
 |
 Posted - 08 Mar 2010 : 11:22:37 AM
|
Hi fellow VNers
what would you say is a fair price for fitting a new clutch to my series 2 (Oct '91) S V6
I have the kit already, just need it fitted (& possibly the flywheel machined?)
The original has now done 296,000k
cheers
John
|
|
Report to Moderator |
|
|
Mechknight73
National Driver
1001 Posts
|
Posted - 08 Mar 2010 : 3:14:54 PM
|
| Machining the flywheel is usually about $50-$70, depending largely on who does it. The clutch change itself is usually up to a 3 hour job, due to the need to take off the gearbox to get at it. Ask the workshops what they charge per hour, and get a few quotes. First you ask how long it would take, then ask how much. |
Report to Moderator  |
|
|
vn-s
Starting in the driveway
3 Posts
|
Posted - 08 Mar 2010 : 10:35:03 PM
|
Thanks Mechknight73, appreciate that info.
cheers
John |
| Report to Moderator |
|
|
Benche
Fully Licenced
240 Posts
|
Posted - 09 Mar 2010 : 5:11:49 PM
|
| do it your self very simple it might take you a day or two if you havent dont it before. i'v been through 3 clutches so far changed em all at home. |
VN V6 MANUAL - 14.1sec 1/4MILE, 150rwkw, 350nm |
| Report to Moderator |
|
|
vn-s
Starting in the driveway
3 Posts
|
Posted - 10 Mar 2010 : 10:34:31 AM
|
thought about it benche, as did the one in my old hq ute many years ago but not overly confident by myself.
You've been through 3! Phew |
| Report to Moderator |
|
| |
Topic |
|
Topic Locked
