|
Mechknight73
National Driver
1001 Posts
 |
 Posted - 18 Jul 2010 : 12:33:06 AM
|
| Having worked in a Holden dealer when the VS was new, and owning an S1 VN now, it seems that the headlights pretty much bolt in the same way as they do on the VNs. Undo all the panels, line up the headlights with the bolt holes, and they should need little, if any mods to make them fit. The one thing you should be aware of, is that you might need to adjust the headlights, once bolted to the body, so they are aimed correctly. I can remember when I was fitting headlight protectors that you're only meant to undo one bolt at a time, as these bolts are part of the headlight aiming adjustment. |
Report to Moderator  |
|
Topic Locked
| Join the Forum to Rate this Topic at: 
