|
Mechknight73
National Driver
1001 Posts
 |
 Posted - 27 Oct 2010 : 5:47:31 PM
|
This is a direct quote from the service manual:
(After the door trims are removed)
1. Carefully prise off the interior and exterior strip mouldings at the top of the door.
2.Undo the bolts holding in the front channel for the window regulator
3. Temporarily connect the window winder/switch, and lower the window, but only enough to grip the glass.
4.With a firm grip on the glass, slide it forwards until it comes out of the roller channel, tilting the front downwards. If both rollers are off the track on the bottom of the glass, you should be able to lift it out. It's simply a case of reversing the process to put them back in, grease the tracks, and so on. Never done this on a VN, only Kingswoods. |
Edited by - Mechknight73 on 27 Oct 2010 5:48:53 PM |
Report to Moderator  |
|
Topic Locked
| Join the Forum to Rate this Topic at: 
