|
sneezy19752
Learner
9 Posts
 |
 Posted - 23 Nov 2006 : 11:49:39 PM
|
| Have read that the voltage regulator for the instruments develops dry solder joints, which play havoc with the temp sensor and also may cause the tacho to be very unresponsive. Apparently, resoldering the connections to the voltage regulator, and spraying a small amount of silicon spray into the internals of the instruments (NOT on the instrument face) solves the problem. But I haven't had the time to do this yet. I think it was on a justcommodore forum. I can't vouch for whether this works, only that that's what I've read and it seems to make sense... |
Cheers,
Sneezy |
Report to Moderator  |
|
Topic Locked
| Join the Forum to Rate this Topic at: 
