| Author |
 Topic  |
|
| |
Current Topic Rating:  | Join the Forum to Rate this Topic at: www.VNCommodore.com Support Forums
|
|
|
pumba3800
P Plater
15 Posts
 |
 Posted - 06 Oct 2006 : 9:58:43 PM
|
hey pplz
I have a gearbox from a vp s2 that had a reco about 80000k ago.
I was wondering if it would do any harm if i put a corvette 2nd servo upgrade kit in it, along with a service,or is it more of a do it when its reco`ed thing?
im not asking alot out of it just a little firmer,in the end is it worth it?
any comments would be great
thanks :)
|
|
Report to Moderator |
|
|
mouce
National Driver
1525 Posts
|
Posted - 07 Oct 2006 : 12:09:08 AM
|
| The upgraded servo along with a stage two shift kit would be WELL worth your while. That thing will snap into gear like mad. |
Bite off more than you can chew, and chew like hell - Peter Brock (1945-2006) |
Report to Moderator  |
|
|
Palmz17
P Plater
77 Posts
|
Posted - 11 Oct 2006 : 11:30:59 PM
|
| whats corvette servo? i'm going to get a stage 2 upgrage soon. i wanna know more about this servo thing |
| Report to Moderator |
|
|
pumba3800
P Plater
15 Posts
|
Posted - 12 Oct 2006 : 2:04:55 PM
|
got mine off this guy, shift kit is looking tempting too :)
http://stores.ebay.com.au/Furious-Performance
- Larger Apply Area Over Stock
- Better Gripping Power For The Band
- Helps Firm The Sloppy Shift Feel
- Good for Heavy Load Towing
- Helps Prolong The Life of 2nd Gear |
| Report to Moderator |
|
|
mouce
National Driver
1525 Posts
|
Posted - 12 Oct 2006 : 2:28:58 PM
|
| From what I've heard the Stage 2 is about as high as you'd want to go on a street car. Stage three is best left to track/drag cars. If you're going for a stage three, then a B&M ratchet shifter is also worth looking into. |
Bite off more than you can chew, and chew like hell - Peter Brock (1945-2006) |
| Report to Moderator |
|
|
sneezy19752
Learner
9 Posts
|
Posted - 23 Nov 2006 : 11:59:08 PM
|
| I've looked with envious interest at these servo upgrades kits many times on ebay, and emailed the ppl who sell them. I was set to buy a boost valve and a servo upgrade kit, but thought it may be best to learn a bit more about them. One thing I don't want is the 1st-2nd gear change to *thump* and so put shock through the drive train and suspension. Has anyone got experience before and after fitting thesea, to a non-recoed transmission? |
Cheers,
Sneezy |
| Report to Moderator |
|
| |
Topic |
|
Topic Locked
