| Author |
 Topic  |
|
| |
Current Topic Rating:  | Join the Forum to Rate this Topic at: www.VNCommodore.com Support Forums
|
|
|
Dano84
P Plater
77 Posts
 |
 Posted - 12 Apr 2008 : 9:50:12 PM
|
hi guys, im a newbie, 1st time poster. my question is this, when removing the shifter on a T5, is there an easy was to unbolt the 2 hex key bolts?? I have 2 manual gearbox's and both of them are so tight i either snap/bend my Hex key or round the thread.
I am desperate to fit this short shifter to my gear box, any suggestions??
|
My V6 will beat your V8 |
|
Report to Moderator |
|
|
trizo
Forum Moderator
3091 Posts
|
Posted - 13 Apr 2008 : 03:38:38 AM
|
| buy a good set of allen keys and use some leverage dude lol! lcok tight is a wonderful thing! |
3 can keep a secret if 2 are dead |
Report to Moderator  |
|
|
Dano84
P Plater
77 Posts
|
Posted - 13 Apr 2008 : 08:13:46 AM
|
| i got a set of JBS allen keys they just seem to round the head, might have to unbolt it from the gearbox and take the whole thing off, now here my next question, is it just the 4 bolts at each corner of the plate on top of the box, holding the gear stick in?? |
My V6 will beat your V8 |
| Report to Moderator |
|
|
trizo
Forum Moderator
3091 Posts
|
Posted - 13 Apr 2008 : 1:47:45 PM
|
fairly sure thats the case m8, undo and should all come out!
lmao @lcok tight , it was l8! |
3 can keep a secret if 2 are dead |
| Report to Moderator |
|
| |
Topic |
|
Topic Locked
