Hi there I have a VN wagon series 2 it seems to be missing a little like it has to much fuel going to the injectors, I have changed filter plugs and leads checked for blown head and everything else that I could think of, done a check on the comp and it comes up 12 normal. any ideas?
could be your coil packs or dfi module. Check the tips of your plugs for irregularities in the coloring of the tips. Is there any fault codes present??
What's the difference between understeer and oversteer? Understeer is when the driver is scared. Oversteer is when the passenger is scared.
yeah I had found out that my number 6 lead has been melting on my heater hose clip, but still no fault codes. I think i had a code 24 but than i changed my fuel filter and reset the comp which was a week ago, but yeah no engine light or anyothere codes but 12.
Carefully (very carefully) pull the leads off your spark plugs one by one while the engine is running(replacing each one after you check it. also good idea to wear gloves) and listen for a change. If you pull one and it doesn't make any difference this will be the one giving you trouble. I would be starting with number 6 myself. Let us know how you go and good luck!!
What's the difference between understeer and oversteer? Understeer is when the driver is scared. Oversteer is when the passenger is scared.
thanks mate number six lead melted again so I changed the set up and now I've got it running away from the hose clamp running great now, got a lot more pick up to
Topic Locked
| Join the Forum to Rate this Topic at: 
Posted - 26 Mar 2009 : 7:25:22 PM
