just wondering. if i take my throttle body apart. yo know unscrew it to check if it is opening 100% can i just put it back together and grind down the little thing stopping it opening to 100% sorry for my non-technical lingo.
also with the VS V6 supercharged cold-air-intake. how easy will this be to fit. to a vr.
one last thing a shift kit. how much can i pick up a stage 2 one for. is it easy to fit? can i do it myself? or am i better off to get it professionally done?
thanks for any help guys.
someday, im going to be a big sports star.... someday, im going to own a big sports bar.
About the shift kit, dont do it yourself! Lots of problems can occur. Get it done professionally and it will get done properly. I got a quote from preston autos(melbourne) for a trans service and stage 2 for $300. Say itll be less $80 or so for the service and youve got a 'round about' price. And preston are good at what they do(from what my mates have told me).
A VN quote to Remember... 'THE MIGHTY SLEDGE HAMMER SOLVES ALL VN PROBLEMS' Anything can fit if its mashed into place...
ok mate welcome 2 the site there is a how 2 in the members forum on throttle bodys infact theres h/t's on just about most things so chek it out and this should answer most if not all q.'s if it dont jump bak on the thread and we wil c wat we can do :P
The how-to has been covered for the t/b. If there's a how-to that you would like to see appear then feel free to ask if you have a problem. If you have one that you can write up, then by all means go nuts.
Glad to see that the club keeps growing.
Bite off more than you can chew, and chew like hell - Peter Brock (1945-2006)
Topic Locked
| Join the Forum to Rate this Topic at: 
Posted - 15 Sep 2006 : 6:14:41 PM
