Hi there, was in the process of installing a Mace Engineering 70 mm throttle body and noticed that the rocker cover gaskets need replacing. Anyone know if there is any difference between series 1 and series 2 gaskets and if so what brand is a good replacement? All I seem to be able to find are cork ones and I'd prefer to go with something a little better such as rubber.
ACL are the only gaskets I use. I am not sure what gaskets the series 1 has but the series 2 has a moulded rubber gasket that is recessed into the cover such as this - http://www.ebay.com.au/itm/HOLDEN-COMMODORE-3-8-V6-ROCKER-COVER-GASKETS-VN-VY-/110595232205 Might be able to change to the series 2 rocker covers and use a rubber gasket but not entirely sure on this one. Cheers
What's the difference between understeer and oversteer? Understeer is when the driver is scared. Oversteer is when the passenger is scared.
i use the ones VNSVLE has shown you mate there red you can get them in black as well, i prefer to use the red ones as i went through 3 sets of the black ones apparently the red ones are used on the l67 supercharged motors
VN Series 1 Rocker Cover Gaskets
| Join the Forum to Rate this Topic at: 
Posted - 31 Oct 2011 : 2:29:52 PM
